Enterprise Name: Huizhou Yosingying Innovation Materials Co. Ltd..
Website:http://dfj86.cn
Contact: Mr. Zhuang 13609663446
Tel: 0752-6618779
Fax: 0752-6618783
Address: Second row on the South Side of Fengwu Village
Section, Qiaoqi, Shiwan Town, Boluo County, Huizhou City, Guangdong Province
What is the reason and solution of the thick rubber line after sealing edge
1. Whether the model is selected accurately, such as fast glue used on a slow speed machine, not bonded, and the hot Sol has begun to solidify, resulting in not pressing tight;
2. Check whether the machining accuracy of the plate is not enough, the saw is not good, and the incision is not straight enough;
3. Whether the sealing edge band is deformed or not enough level or arc type;
4. The pressure wheel of the sealing machine is worn, and the pressure is not uniform up and down, and unilateral rubber lines are thick;
5. The pressure of the sealing machine is not enough, it can not be pressed, and the pressure of 3-5 kg/cm2 is required;
6. Apply too much glue, glue overflow.
Online Service
